Qingqi QM110GY, Owner'S Manual

Page: 9 / 48

-8-
Chapter 3 Control Part
Key
Two keys are provided. Please
use one key and put the other in a
safe place for future use.
Instrument panel
Odometer (1) ecords the total
distance that the motorcycle has
traveled since it was used.
Speedometer (2) shows the moving
speed in km per hour.
Turning signal lamp (3)
When left
turning signal lamp is ON, the left
turning signal indicator on the panel
" " and turning signal lamp
will flash.
When right turning signal lamp
is ON, the right turning signal
indicator on the panel " " and
turning signal lamp will flash.
Precaution:
If one of front and rear turning
lights is damaged, the indicators on
the instrument panel and the turning
lights may be lit consistently, or may
flash fast or slow. Then, timely
locate the cause and carry out
troubleshooting.
Tachometer (4)
It shows the engine
rotation speed in number of
revolutions per minute.
Trip meter (5) Trip meter is a kind of
odometer that can be reset. It is
installed in odometer. It is mainly
used to measure short distances or
for calculation of fuel consumption.
Reset knob (6) Turn it
counterclockwise to reset the
mileage number on the trip meter to
zero.
High beam indicator lamp (7) When
the head light is in high beam, the
indicator is lit.
Neutral gear indicator lamp (8) when
the transmission is in neutral
position, the indicator will be lit.
When any other gear is engaged, the
indicator goes OFF.
Ignition switch