-27-
magnesia.
Keep away from reach by
children.
2. Electrolyte filling
Before filling electrolyte,
remove battery from the vehicle.
Check if the electrolyte
conforms to specification
requirements.
Direction for use of
maintenance-free battery:
No electrolyte filling is
necessary before and after battery
using. To prolong the service life,
fully recharge it before using.
Note
No matter what type it is, the
battery may discharges and power
may drop after a long store time.
After removing from the vehicle and
fully recharge, store it in a cool and
well ventilated place.
When the vehicle is not used
for a long time, remove the negative
(-) wire from battery.
Spark plug
0. 6 - 0. 8 m m
After the first 1000 km and
every 3000 km thereafter, clean off
any carbon deposit from spark plug
by using a small steel wire brush or
a spark plug cleaner. Readjust the
spark plug gap with a thickness
feeler to keep it between 0.6 - 0.8
mm. Replace spark plug every 6000
km.
When cleaning off carbon
deposit, observe the color of the
ceramic tip of spark plug. The color
can tell you if standard spark plug
suit your usage. If a standard spark
plug shows wet or very dark, it may
be better to use a spark plug with
lower caloric value. A normal
working spark plug should be light
Summary of Contents for QM110GY
Page 43: ...42...
Page 47: ...46 Chapter 12 Circuit Diagram...
