Qingqi QM110GY, Owner'S Manual

Page: 17 / 48

-16-
-4 14 50 68 86 32 104 -2 2
F
Tem perature
Visco s ity g ra de
API classification
SG High
Low
SF
SE
SD
SE or SF level SAE10W-30
4-stroke lubricant is recommended.
Note
Lubricant should be replaced
at 1000km or about one month for
the first time, every 3000km
thereafter. Oil volume is 850ml for
replacement or 1300ml after
overhaul.
The quality of engine oil is a
major factor affecting the service life
of engine. Replace engine oil
according to the maintenance period
stated in maintenance table (please
refer to Page 19). When riding in
dusty areas, engine oil should be
replaced more frequently than the
stipulations in the maintenance table.
Explanation:
During cold weather in
northeast and northwest China, it is
advisable for user to use high quality
low temperature lubricating oil. SE
10W-30 or SF 5W-30 is
recommended. For temperature
below -35°C, the following use time,
API SG or higher class 5W-30
lubricant of notable brand is
recommended.
Warning:
Inferior lubricant may cause
irretrievable loss to the engine and
seriously shorten the service life of
engine.
Chapter 5
Running-in of new
motorcycle
The importance of correct new
vehicle running-in was mentioned in
Foreword. The correct running-in
method is as follows.
Maximum speed
The maximum speed during
running-in period is shown in the
table.
First 800 km <5000 rpm
At 1600 km <7500 rpm
After 1600 km <10000 rpm
Changes of engine speed
Do not drive at a constant
engine speed for a long time. For a
better running-in, properly increase
and reduce the throttle opening.