Qingqi QM110GY, Owner'S Manual

Page: 33 / 48

-32-
Front brake light switch
The switch of front brake light
is located below the brake lever.
Loosen the screw and move the
switch position back and forth to
find a proper point so that the lamp
is lit immediately when pressure is
applied but before the lever is fully
pressed.
Rear brake
Adjustment of rear-wheel brake
If the rear brake is drum brake,
to adjust the rear-wheel brake pedal,
set the pedal to the most comfortable
position for riding by rotating the
pedal adjustment nut. Then, rotate
the free play adjusting nut (2) to
keep the free play (1) between
20-30mm.
Free play
Adjusting nut
Wearing limit of brake lining
The motorcycle is provided
with brake lining wearing limit
indicator in the rear brake. To check
the wearing of brake lining, do as
follows:
1
Check for correct adjustment of
the rear brake.
2 Operate the brake and check if
the limit extension line is in the
allowed range, as shown in Fig.
A.
Ran ge
I ndex m ark