Qingqi QM110GY, Owner'S Manual

Page: 10 / 48

-9-
The ignition switch has two
positions:
" " (OFF) position All circuits
are disconnected and the key can be
removed.
" " (ON) position All igniting
circuits are ON and the engine can
be started. The key cannot be
removed in this position.
Steering lock
To lock the steering handlebar,
turn the handlebar to left, insert the
key and turn it clockwise.
Warning:
When the steering handlebar is
locked, never move the motorcycle
or you may lose balance.
Left handlebar control system
Dimmer switch (1) When dimmer
switch is turned up to " " (high
beam) position, the head light is in
high beam and the high beam
indicator lamp on the instrument
panel is lit. On contrary, when it is
turned down to " " (low beam)
position, the low beam is lit.
Lighting switch (2)
" " ON position When the
switch is turned to this position, the
head light, front position light,
instrument panel light and rear tail
light will be lit.
" " parking light position
When the switch is turned to this
position, the front position light,
instrument panel light and rear tail
light will be lit.
" OFF position All the head light,
front position light, instrument panel
light and rear tail light go OFF.
Turning signal operation (3) When
the switch is turned to left " "
position, the left turning signal lamp
is lit and the indicator lamp on
instrument panel flashes. When the
switch is turned to right " "
position, the right turning signal
lamp is lit and the indicator lamp on
instrument panel flashes.
Warning:
Whenever you are going to
change lane or make a turn, turn ON
the turning signal lamp. After lane
change or turning, timely turn the