Qingqi QM110GY, Owner'S Manual

Page: 31 / 48

-30-
recommended in "Instructions on
fuel and engine oil".
Brake
There are two types of brake
for the front and rear brake of the
motorcycle, i.e., drum brake and
disk brake.
Check the brake after first 1000
km and every 3000 km thereafter.
Correct braking operation is
very important to safe riding. Be
sure to carry out regular inspection
of brake system by qualified
distributor.
Warning
Brake is related to personal
safely and should be kept in good
order.
If the brake system or brake
lining needs repair, you are strongly
recommended to have the job done
by your distributor. They are
equipped with complete tools and
proficient techniques and capable to
do it in a safe and economical way.
Front brake
For the brake, the distance from
natural status to braking action is
known as "free play". If the front
brake is a drum brake, the free play
of brake lever measured at lever
bracket should be 10-20mm.
1
Rotate the adjusting nut of
front brake clockwise or
counterclockwise to adjust the free
play to specified value.
2
After free play adjustment, lift
the front wheel off the ground.
Rotate the front wheel to check for
any resistance. At the same time,
press the front brake lever firmly
and there should be adequate
clearance between the front brake
lever and handgrip.
If the front brake is a disk brake,
the free play of brake lever
measured at lever bracket should be
5-10mm.
Hydraulic brake system
should be checked everyday, as
follows:
1 Check for leakage in the front
wheel brake system.
2
Check for any leakage or crack
in oil pressure pipe.
3
The front brake lever should
have a certain back spring force.
4
Check wearing conditions of
front wheel brake lining.
Precaution
Wheel disk brake system is a
high pressure brake. For safety, the