-34-
the chassis. A fuse is provided for all
the electrical system. In case of any
trouble to electrical system, check
the fuse first. If the fuse is blown out,
replace it with the spare fuse (15A)
in the fuse box.
Precaution
Always replace the blown fuse
with a new one of the specified
amperage. Never use aluminum foil,
steel wire or other things as
substitute for fuse. If a new fuse is
blown in a short time, it means there
is a major electric trouble. Contact
your distributor immediately.
Replacement of bulb
The rating of bulbs can be
found in Chapter 13 Parameter List.
Always replace a bulb with a new
one of the same rating. Otherwise,
overload to electric system and
premature bulb damage may be
caused.
Precaution
The head light is generally
reflection lamp. Do not touch the
reflector during bulb replacement, so
as to prevent reduction of service
life.
For turning signal light, tail
light and brake light, when installing
light shield, do not excessively
tighten the fixing screws to avoid
damaging the light shield.
Air filter
If the air filter element is
clogged by dust, the output power
may reduce and the intake resistance
may increase; The fuel consumption
will also increase. Therefore, the air
filter element should be checked and
cleaned every 3000 km, as follows.
Precaution
If the motorcycle is working in
dusty conditions, the air filter should
be checked and cleaned more
frequently before schedule.
1 Remove the left side guard board.
2
Unscrew the air filter outer cover
screw (1) and take out the air filter
sleeve (2).
3
Take out the air filter foamed
plastic sleeve shell.
4
Separate the foamed plastic from
the outer frame.
Precaution
During cleaning the filter
element, check for any damage
to the filter element and replace
when necessary.
Never start the engine without
the filter element installed, or
the engine wearing may be
Summary of Contents for QM110GY
Page 43: ...42...
Page 47: ...46 Chapter 12 Circuit Diagram...
