Qiagen 9002022 User Manual Download Page 20

Page: 20 / 208

Rotor-Gene Q MDx CE User Manual 02/2022

2.7

Maintenance safety

Perform the maintenance as described in Section 8. QIAGEN charges for repairs that are required
due to incorrect maintenance.

WARNING
/CAUTION

Risk of personal injury and material damage

Only perform maintenance that is specifically described in this user manual.

WARNING

Risk of fire

When cleaning the Rotor-Gene Q MDx with alcohol-based disinfectant, leave
the Rotor-Gene Q MDx door open to allow flammable vapors to disperse.

WARNING
/CAUTION

Risk of electric shock

Do not disassemble the Rotor-Gene Q MDx instrument.

CAUTION

Damage to the instrument housing

Never clean the instrument housing with alcohol or alcohol-based solutions.
Alcohol will damage the housing. To clean the housing, use distilled water
only.

Summary of Contents for 9002022

















































































































































































































Search results

Summary of Contents for 9002022

Reviews:

Related manuals for 9002022

Brands by name

Popular brands

Qiagen 9002022, User Manual

Search results

Summary of Contents for 9002022

Reviews:

Related manuals for 9002022

Brands by name

Popular brands