Qiagen 9002022 User Manual Download Page 122

Page: 122 / 208

Rotor-Gene Q MDx CE User Manual 02/2022

122

6.7.3

Stop Run

If this option is selected, a prompt will appear asking for confirmation that the run should be
stopped.

6.8

View menu

6.8.1

Run Settings

General

This window allows the setup of run information, run filename, analysis date, operator, and any
associated notes.

The window contains all information, except for the profile, required to configure a run. After a run
has finished, the following information is displayed in this window: cycler used, gain settings,
number of channels, and time of start and finish.

Machine Options

This tab displays settings for the configuration of the Rotor-Gene Q MDx.

Summary of Contents for 9002022

















































































































































































































Search results

Summary of Contents for 9002022

Reviews:

Related manuals for 9002022

Brands by name

Popular brands

Qiagen 9002022, User Manual

Search results

Summary of Contents for 9002022

Reviews:

Related manuals for 9002022

Brands by name

Popular brands