33
I
Electrical Connections
[ Figure 5-13 : Front Cover Assembly Process 1 ]
[ Figure 5-14 : Front Cover Assembly Process 2 ]
Screwing
Torque = 1.4Nm
5.4 Closing the Front Case Cover
NOTICE
Make sure that connection between connector and ground match correctly, before
reassembling front lower cover.
1. Hold the front lower cover with both hands. As shown in the [Figure 5-13], slide the bottom cover at
an angle and connect it to the top cover.
2. As shown in the [Figure 5-14], Use a hexagon wrench (size : M4) to fasten the bolt clockwise.