3. Connect the LAN cable between Q.HOME+ ESS HYB G2 and Laptop.
4. Turn the power On (Grid On) and PV S/W On.
5. Access to SIM (System Install Manager)
http://17.91.23.196:8000
6. Install the settings (As shown in the [Figure 7-3]).
7. Turn the power Off (Grid Off) and PV S/W Off.
→
Remove Jumper Wire.
8. Connect Internet LAN Cable.
9. Turn the power On (Grid On) and PV S/W On.
7.3.3.2 Connection URL
• http://17.91.23.196:8000
7.3.3.3 Connection Screen
1 - Value : INVERTER Active Power
• Input Range : 0 ~ 100% (P/Pmax)
• Pmax = Maximum INVERTER Output Power
2 - SL,SH : Rate of change of power with respect to frequency change
• Input Range : 2 ~ 12%
- Xn : Frequency
• X1,X2 Input Range : 40.0 ~ 60.0 Hz
• X3,X4 Input Range : 50.0 ~ 70.0 Hz
3 - Xn : Voltage
• Input Range : 0.8 ~ 1.2U
• U = 230.0 Vac
- Yn : Power
• Input Range : 0.0 ~ 1.0 Pmax
• Pmax = Maximum INVERTER Output Power
4 - Value : Power Factor
• Input Range : 0.8 ~ 1.0
5 - Xn : Power
• Input Range : 0.0 ~ 1.0 Pmax
• Pmax = Maximum INVERTER Output Power
- Yn : Power Factor
• Input Range : 0.8 ~ 1.0
6 - Value : Power Factor
• Input Range : 0.0 ~ 0.6
7 - Xn : Voltage
• Input Range : 0.0 ~ 1.9999U
• U = 230 Vac
- Yn : Reactive Power
• Input Range : -60.0 ~ 60.0%
[ Figure 7-3 : Initial Setup Page ]
Entering Initial Installation Information
I
54
1
4
5
6
7
2
3
