Aurora Design SCRF-441M Standards Converter
525/30i (NTSC) to 441/30i with System M modulator.
(Positive video, AM audio, audio carrier level -6db)
Selector
Channel
Video
Audio
Position
Assignment
Frequency
Frequency
0
Disabled
1
1
45.25 MHz
49.75 MHz
2
2
55.25 MHz
59.75 MHz
3
3
61.25 MHz
65.75 MHz
4
4
67.25 MHz
71.75 MHz
5
5
77.25 MHz
81.75 MHz
6
6
83.25 MHz
87.75 MHz
7
7
175.25 MHz
179.75 MHz
8
8
181.25 MHz
185.75 MHz
9
9
187.25 MHz
191.75 MHz
A
10
193.25 MHz
197.75 MHz
B
11
199.25 MHz
203.75 MHz
C
12
205.25 MHz
209.75 MHz
D
13
211.25 MHz
215.75 MHz
E
14
471.25 MHz
475.75 MHz
F
15
477.25 MHz
481.75 MHz
Selector Position
Option Function
0
Converter Enable/Bypass Mode
1
Sleep Mode
2
Default Audio Tone
Momentarily press Aux button to toggle between stored default images.
Note: To change an Option Setting, depress the Option Button for 1
second to enter the Option Setting Mode. Turn the Selector Switch to the
desired position. The Status LED will blink Green for enabled, Red for
disabled, and Yellow for not supported. Momentarily press the Option
Button to toggle the setting. When finished, depress the Option Button for
1 second to exit the Option Setting Mode. Note: the Option Setting Mode
will automatically exit if no changes are made for 1 minute.
www.tech-retro.com v4.0
Aurora Design SCRF-441M Standards Converter
525/30i (NTSC) to 441/30i with System M modulator.
(Positive video, AM audio, audio carrier level -6db)
Selector
Channel
Video
Audio
Position
Assignment
Frequency
Frequency
0
Disabled
1
1
45.25 MHz
49.75 MHz
2
2
55.25 MHz
59.75 MHz
3
3
61.25 MHz
65.75 MHz
4
4
67.25 MHz
71.75 MHz
5
5
77.25 MHz
81.75 MHz
6
6
83.25 MHz
87.75 MHz
7
7
175.25 MHz
179.75 MHz
8
8
181.25 MHz
185.75 MHz
9
9
187.25 MHz
191.75 MHz
A
10
193.25 MHz
197.75 MHz
B
11
199.25 MHz
203.75 MHz
C
12
205.25 MHz
209.75 MHz
D
13
211.25 MHz
215.75 MHz
E
14
471.25 MHz
475.75 MHz
F
15
477.25 MHz
481.75 MHz
Selector Position
Option Function
0
Converter Enable/Bypass Mode
1
Sleep Mode
2
Default Audio Tone
Momentarily press Aux button to toggle between stored default images.
Note: To change an Option Setting, depress the Option Button for 1
second to enter the Option Setting Mode. Turn the Selector Switch to the
desired position. The Status LED will blink Green for enabled, Red for
disabled, and Yellow for not supported. Momentarily press the Option
Button to toggle the setting. When finished, depress the Option Button for
1 second to exit the Option Setting Mode. Note: the Option Setting Mode
will automatically exit if no changes are made for 1 minute.
www.tech-retro.com v4.0
