Proware SN-3163S3H-QX, User Manual

Page: 56 / 237

SAS / SATA II NAS System
56 User Manual
When is the “Activate Raid Set” function can be used?
In order to access the Volume Set and corresponding data, use the
Activate
Incomplete RAID Set function to active the Raid Set. After selecting this
function, the Raid State will change to “ Degraded ” state.
To activate the incomplete the Raid Set, click on the
Activate Incomplete RAID
Set link . A “Select The Raid Set To Activate” screen is displayed showing all existing Raid
Sets in the subsystem. Select the Raid Set with “ Incomplete ” state which you want to
activate in the Select column.
Click on the Submit button to activate the Raid Set. The Volume Set(s) associated
with the Raid Set will become accessible in “ Degraded ” mode.
NOTE: The “Activate Raid Set” function is only used when Raid Set
State is “Incomplete”. It cannot be used when Raid Set
configuration is lost. Use the Rescue Raid Set function instead.