Proware SN-3163S3H-QX, User Manual

Page: 230 / 237

SAS / SATA II NAS System
230 User Manual
16. On the "Basic Settings" tab, input a resource name.
Resource Basic Setting:
Resource Name A unique name for identifying the resource group.
AC interval
(Availability Check
Interval) A time interval for proNAS HA to check the
availability of the resource group periodically.
AC Retry
(Availability Check
Retry) The number of times for proNAS HA to check the
availability of the resource group periodically.
Stop timeout Specify the period of time for resource startup and
stop. If a server fail to receive the heartbeat in
time exceed this threshold, the peer server will be
considered down or unavailable. The resource
group of the peer server will be taken over.
Skippable if
releasing resource
fail This option is disabled by default. Basically all of
the resource group of the peer server will be
taken over when the peer server fails. Users can
add the checkmark to enable this option. The
failover will be taken even if resource releases fail.
17. On the "IP Address Resource" tab, select the original IP address (eth0 IP) for both
local and remote proNAS, enter an active IP address, active subnet mask and
then save. Active IP address is the virtual IP address.
IP Resource:
Original IP Address Choose the original IP Address for the local and
peer server.
Active IP Address Type an IP Address (virtual IP) for client-end
applications to access specific resources on the
NAS Target Server.
Active Subnet Mask The subnet mask used by the Active IP Address.