
SAS / SATA II NAS System
142
User Manual
8.2.2 Internet Gateway
proNAS provides Internet gateway function which enables proNAS to act as an Internet
Gateway, integrating DHCP service, routing and NAT. Using Internet gateway function,
administrators can easily enable and disable the Internet access for network users.
To configure Internet Gateway, press “Edit” button.
Configuration options:
DHCP's IP range starting from -
means the lower bound (starting) range of
private IP addresses for DHCP
DHCP's IP range ending with -
means the upper bound (ending) range of
private IP addresses for DHCP
Private Net Adapter -
means the port connected to private network. This port
has to be a Static port and could also be a Trunk port.
WAN Adapter
: means the port connected to WAN or Internet. This port could be
a Trunk port.
NOTE: When using Internet Gateway function, make sure the
Internet Gateway service is enabled in the Service tab of System
Manager.
Summary of Contents for SN-3163S3H-QX
