Proware SN-3163S3H-QX, User Manual

Page: 126 / 237

SAS / SATA II NAS System
126 User Manual
3. The Create Replication window will be displayed. Set the options below and click
“OK” when done.
Replication Options:
[Remote]
‹
Local - Select the IP address of the local (source) proNAS that will be used for
replication.
‹
Remote - Select or type manually the IP address of remote (destination) proNAS
that will be used for replication.
NOTE: The local and remote IP addresses serve as the channel
between the source and destination NAS servers. This is where the
replication of data takes place. Please be sure to have a good
connection on this medium. As much as possible, set this channel
as a dedicated or a private network. It is recommended to use
different Ethernet port for replication from the Ethernet port used
for data access. It is best to use a crossover network link between
the Ethernet ports involved. Refer to Network Manager Section for
configuring Ethernet port.
‹
Remote VG - Select the VG on remote proNAS where the replicated logical volume
will be created.