Proware SN-3163S3H-QX, User Manual, Page: 39 / 237

SAS / SATA II NAS System
User Manual 39
4.2 Configuration through the LCD Panel
All configurations can be performed through the LCD Display front panel function keys,
except for the “Firmware update”. The LCD provides a system of screens with areas for
information, status indication, or menus. The LCD screen displays menu items or other
information up to two lines at a time. The RAID controller’s factory default password is
set to
00000000 .
Function Key Definitions
The four function keys at the top of the front panel perform the following functions:
Parts Function
Up and Down
Arrow buttons
Use the Up or Down arrow keys to go through the
information on the LCD screen. This is also used to
move between each menu when you configure the
RAID.
Select button This is used to enter the option you have selected.
Exit button EXIT
Press this button to return to the previous menu.
NOTE: This button can also be used to reset
the alarm beeper. For example, if one power
supply fails, pressing this button will mute the
beeper.