Proware SN-3163S3H-QX, User Manual

Page: 229 / 237

SAS / SATA II NAS System
User Manual 229
14. Input a resource group name. You may check "Auto Switch back" or "Auto Bring
In" then click “Save”.
Resource Group Properties:
Resource Name A unique name for identifying the resource group
Active Server The active server of the resource group
Backup Server The peer server is automatically display
Local Status The status of the local server
Peer Status The status of the peer server
Auto-switch
back An option for enabling the Group to be switched back
from the Backup server to the Target server
automatically when the Target Server is available
again.
Auto Bring In An option for enabling the resource group to be
brought in automatically when Cluster is started.
Buttons:
Bring in The selected resource group will be activated and
brought under the protection of proNAS HA. This
button is only visible if there are resource group
added.
Bring out The selected resource group will be brought out from
the protection of proNAS HA. A resource group can be
brought out of cluster to perform maintenance or
troubleshooting. This button is visible if resource
groups are brought in.
15. Click the resource group name on the left tree node then press "Add Resource".