Proware SN-3163S3H-QX, User Manual

Page: 233 / 237

SAS / SATA II NAS System
User Manual 233
Indicators:
Users can accurately monitor the status of the system such as the License status, Private
Net, Public Net and the resource takeover/failover. When a condition occurs, the icon will
turn red. You will also see a message appear in the Event Log.
Private Net: This icon will turn red if there's a problem with the connection of the
private net.
Public Net: This icon will turn red if there's a problem with the connection of the
public net.
Failover/Takeover: This icon will turn red during the failover or takeover scenario.
License: This icon will turn red if proNAS HA is not registered.
Host box: Display the status of Local and Peer Server
Resource Group box: Display the resource group status
Buttons:
Stop Cluster button
Stop Cluster Operation.
Start Cluster button Start Cluster Operation.
Get peer IPs button
Get the IP's of the peer server and display it in the host
peer table.
Network test button Tool for testing network IP address (e.g ping ip)
11.4 Extending a Logical Volume in HA
Extending a logical volume while in cluster is basically not allowed same as in replication,
however here is the workaround.
1. Stop Cluster
2. Stop HA service for both proNAS.
3. Abort the replication of the logical volume that needs to be extended.
4. Extend the logical volume on the Active server.
5. Removed the logical volume (the replica) on the standby server.
6. Start HA service for both proNAS.
7. Start cluster.