Proware SN-3163S3H-QX, User Manual

Page: 128 / 237

SAS / SATA II NAS System
128 User Manual
4. A message box will be displayed.
5. Initialize the Replication by clicking “Initial Replication” button.
NOTE: After creating a replication, a similar logical volume will be
created on the destination server under the specified VG. At this
point, the replication is not yet initialized and no synchronization.
Replication still needs to be initialized. After selecting “Initial
Replication”, the first node will then connect to the second node
and starts to synchronize. Synchronization typically takes quite a
while especially on larger logical volumes. After initializing, the
source node should be in "Primary" state and the destination node
should be in "Secondary" state. If this is the state, you have now a
working replication. Initializing should be done in the source
volume.
6. The volume replication setting will be initialized.