PLX51-PBM
Setup
PROFIBUS DPV0/DPV1 Master or Slave to EtherNet/IP™ or Modbus® Gateway
User Manual
ProSoft Technology, Inc.
Page 77 of 196
The module selection dialog will open. To find the module more easily, use the
Vendor filter to select only the ProSoft Technology modules as shown in the figure
below.
Figure 3.99
– Selecting the module
Locate and select the PLX51-PBM module and select the
Create
option. The module
configuration dialog will open, where the user must specify the Name and IP address
as a minimum to complete the instantiation.
Figure 3.100
– Module instantiation
