PLX51-PBM
Diagnostics
PROFIBUS DPV0/DPV1 Master or Slave to EtherNet/IP™ or Modbus® Gateway
User Manual
ProSoft Technology, Inc.
Page 178 of 196
DPV1 Class 2 Write Rx Count
(PLX51-PBM Master mode only) The number of successful
PROFIBUS DPV1 Class 2 Write responses received from the
specific device.
DPV1 Class 2 Write Err Count
(PLX51-PBM Master mode only) The number of failed
PROFIBUS DPV1 Class 2 Write responses received from the
specific device.
Set Slave Addr Tx Count
(PLX51-PBM Master mode only) The number of PROFIBUS Set
Slave Address requests sent from the PLX51-PBM to the
specific device.
Set Slave Addr Rx Count
(PLX51-PBM Master mode only) The number of successful
PROFIBUS Set Slave Address responses received from the
specific device.
Set Slave Addr Err Count
(PLX51-PBM Master mode only) The number of failed
PROFIBUS Set Slave Address responses received from the
specific device.
Global Ctrl Tx Count
PLX51-PBM Master Mode: The number of PROFIBUS Global
Control requests sent from the PLX51-PBM to the specific
device.
PLX51-PBM Slave Mode: The number of PROFIBUS Global
Control responses sent by the specific slave device.
Global Ctrl Rx Count
PLX51-PBM Master Mode: The number of PROFIBUS Global
Control requests received by the PLX51-PBM from the specific
device.
PLX51-PBM Slave Mode: The number of PROFIBUS Global
Control requests received by the specific slave device.
Unexpected Packet Received
The number of times a response is received from the device that
was not expected (e.g. incorrect response, response from a
different node, etc.).
Invalid Response Length Count
The number of times a response is received from the device
where the length is not correct (for example if the device is
configured to provide 10 bytes of process data and only 5 bytes
are returned during data exchange).
FDL Fault Count
The number of Data Link Layer function code faults received
from the specific device.
Extract Alarm Success Count
The number of alarms that have successfully been extracted
from the specific device.
Extract Alarm Fail Count
The number of alarms that have
not
successfully been extracted
from the specific device.
PLX51-PBM Slave mode: N/A
Initialize Parameter Set Success Count
The number of parameters that have successfully been set after
the device has been configured for data exchange for the
specific device.
Initialize Parameter Set Fail Count
The number of parameters that have failed to set after the
device has been configured for DPV0 data exchange for the
specific device.
Device Reconfigure Count
The number of times the device has been (re)configured for
DPV0 data exchange.
Device Reparameterize Count
The number of times the device has been (re)parameterized for
DPV0 data exchange.
Ext Diag Overflow Count
The number of times the device has returned diagnostics data
that could not fit into a single PROFIBUS frame.
