PLX51-PBM
Setup
PROFIBUS DPV0/DPV1 Master or Slave to EtherNet/IP™ or Modbus® Gateway
User Manual
ProSoft Technology, Inc.
Page 54 of 196
The Module User Parameter Editor will appear. The parameters and their
enumerated options are derived from the GSD file.
Figure 3.58
– Device Slot configuration additional parameters
Once the slot parameters have been updated the user can click the
OK
button which
will update the Extended User Parameters and return to the Slot Configuration page.
When adding a slot, the data format and size will default to that of the selected
module in the GSD file. Depending on the GSD file, the default configuration may not
be preferred and can be changed by the user.
Formatting the modules data can be achieved by a combination of adding or
removing Data Points and changing the Data Type of each.
Data Points can be added by either right-clicking on the module and selecting
Add
Data Point
or by clicking on the “
+
” button.
Data Points can be removed by either right-clicking on the module and selecting
Delete Data Point
or by clicking on the “
X
” button.
Figure 3.59
– Adding / Removing Data Points
NOTE: Each module must contain at least one Data Point.
