ICX35-HWC ♦ Industrial Cellular Gateway
Watchdog
3G/4G LTE
User Manual
ProSoft Technology, Inc.
Page 97 of 127
F. No Belden Horizon connection while endpoint address is reachable.
The default endpoint address present in the configuration file is 8.8.8.8
(watchdog/endpointaddr=8.8.8.8).
This scenario is activated if:
The device is active in Belden Horizon;
The connectivity to the desired endpoint (rate of successful pings to the
address) is good (the internet connection is up);
The number of attempts to reach Belden Horizon are less than the
configured threshold (watchdog/percentatagefail).
In this scenario, the watchdog mechanism will reboot the device at the time
interval specified (minutes) in the configuration file
(watchdog/endpointtimeout=15). This scenario applies if the device is not
active in Belden Horizon. This is configurable from the local UI via the
Endpoint Timeout parameter.
G. The Belden Horizon connection through the agent is compromised (no
traffic through the websockets connection, agent suspends).
This scenario is activated if:
The device is active in Belden Horizon;
The agent process, which is responsible for the connection with Belden
Horizon is suspended (Belden Horizon and internet connection are up but
there is an internal issue with the agent software).
In this scenario, the watchdog mechanism will reboot the device at the time
interval specified (minutes). This is configurable from the local UI via the
Belden Horizon Timeout
parameter.
