ICX35-HWC ♦ Industrial Cellular Gateway
ICX35-HWC Webpage
3G/4G LTE
User Manual
ProSoft Technology, Inc.
Page 29 of 127
Cellular Interface
Parameter
Description
User Name
(Optional) User name for the connection
Password
(Optional) Password for connection
Wait Between Reconnect The number of seconds to wait before trying to establish a reconnect. If this
is set to '0', the auto connection is disabled.
Authentication
CHAP
- Challenge Handshake Authentication Protocol
PAP
- Password Authentication Protocol
PAP & CHAP
- A mix of both methods
Roaming
This setting prevents the device from connecting to a non-native network,
helping to prevent additional charges.
Keep Alive
If enabled (0 denoting Disabled), this parameter sets the keep alive ping
period time in seconds. When Enabled, the two fields listed below appear.
Keep Alive Ping Address Time to keep a connected address connection alive
Keep Alive Ping Period
Number of seconds to ping to ping address in order to keep a connection
between a cell tower and a module alive
Cellular Interface
Disabling this parameter allows the ICX35-HWC to access the internet,
including Belden Horizon through the LAN interface. This would disable the
ICX35-HWC WAN interface. SMS will still be available.
Note: Disabling Cellular Internet Access will enable internet access through the
LAN interface. The following features will be disabled:
*LAN DHCP ServerOpenVPN
*IPsec
*Pass Through (End Device Address parameter is cleared)
*Port Forwarding (All existing rules are cleared)
Note: Excluding the Keep Alive parameter, the ICX35-HWC reboots when updating other WAN
parameters (by clicking Apply).
