ICX35-HWC ♦ Industrial Cellular Gateway
ICX35-HWC Webpage
3G/4G LTE
User Manual
ProSoft Technology, Inc.
Page 27 of 127
3.2
Configuration Tab
3.2.1
Basic
The
Configuration > Basic
tab allows you to configure the
Module
and
LAN
settings.
Gateway Settings
Parameter
Description
Module Name
Name of ICX35-HWC on network
APN
Access Point Name of the network path for cellular connectivity. This name is
assigned by your cellular network provider.
LAN Settings
Parameter
Description
Mode
Select Static or DHCP
IP Address
IP address of the ICX35-HWC Ethernet port
Subnet Mask
Subnet mask of the ICX35-HWC Ethernet port
DHCP Server
Enables/Disables DHCP functionality
DHCP Range
Used when
DHCP Server
is enabled. DHCP range of end devices
Lease Time
Used when
DHCP Server
is enabled. Enter the lease time using seconds,
minutes, or hours. This setting depends on your cellular plan.
Static Lease Table
Used when a list of specific clients, identified by their MAC addresses, need to
be reserved specific IP addresses. Add one static lease per client.
SIM Settings
Parameter
Description
SIM Status
Current state of SIM card. For more information, see
SIM Card PIN
Verification
.
Unlocked
– The ICX35-HWC’s non-emergency functions are enabled.
Locked
– The non-emergency cellular functions are disabled and you must
enter the
PIN Verification
to enable them.
PIN Verification
A 4 to 8 digit PIN used to unlock the non-emergency cellular functions of the
SIM card.
