ProSoft Technology ICX35-HWC User Manual Download Page 72

Page: 72 / 127

ICX35-HWC ♦ Industrial Cellular Gateway

Hardware Installation

3G/4G LTE

User Manual

ProSoft Technology, Inc.

Page 72 of 127

WWAN LED

LED

State

Description

Off

ICX35-HWC is powered off.

Solid Green

ICX35-HWC is powered and connected, but is not
transmitting or receiving.

Slow Blink

Flashes at a steady, slow
rate: 0.2 Hz (5 sec)

ICX35-HWC is powered and searching for a connection.

Faster Blink

Flashes at a steady, fast
rate: About 3 Hz (333 ms)

ICX35-HWC is transmitting or receiving data.

Note: The WWAN LED indicates a physical connection state between the ICX35-HWC and the cell
tower. It is not an indicator of a logical connection state. There may be a situation when you may see a

“Disconnect, will retry” indicator on the ICX35-HWC webpage, even when the WWAN LED light is on

(solid green). This indicates that the module was able to make a physical connection to the tower, but

the logical connection was not made between the ICX35-HWC and the cellular provider.

Summary of Contents for ICX35-HWC
































































































































Search results

Summary of Contents for ICX35-HWC

Reviews:

Related manuals for ICX35-HWC

Brands by name

Popular brands

ProSoft Technology ICX35-HWC, User Manual

Search results

Summary of Contents for ICX35-HWC

Reviews:

Related manuals for ICX35-HWC

Brands by name

Popular brands