ICX35-HWC ♦ Industrial Cellular Gateway
ICX35-HWC Tech Notes
3G/4G LTE
User Manual
ProSoft Technology, Inc.
Page 111 of 127
10.2.2
Enable Pass Through
1
Navigate to
Configuration > Firewall
.
2
Enable the
Status
parameter under the
Pass Through
heading.
3
Enter the IP Address of the device connected to the
ICX35-1
(172.020.000.220) in the
End Device Address
parameter
4
Click the
A
PPLY
button.
5
Perform the same procedure for the
ICX35-2
.
10.2.3
Configuring End Device 1
When configuring the end device, keep the following points in mind:
The IP Address of the end device connected to
ICX35-1
must match the
value entered in the
End Device Address
parameter in the
ICX35-1
.
The gateway address on the end device must point to the
ICX35-1 IP
Address
and
Subnet Mask
addresses.
10.2.4
Configuring End Device 2
When configuring the end device, keep the following points in mind:
The IP Address of the end device connected to
ICX35-2
must match the
value entered in the
End Device Address
parameter in the
ICX35-2
.
The gateway address on the end device must point to the
ICX35-2 IP
Address
and
Subnet Mask
addresses.