ICX35-HWC ♦ Industrial Cellular Gateway
EtherNet/IP and SMS Text Messaging
3G/4G LTE
User Manual
ProSoft Technology, Inc.
Page 83 of 127
3
The ICX35-HWC status controller tags are defined below:
EtherNet/IP Class ID: 0xA1 (161)
Number of Instances: 1
ICX35.STATUS.
Data Type
Description
RSSI
SINT
Current Signal Strength. Range -50 to -125 dBm
Value
1
= -128
Min_RSSI *
SINT
Minimum Signal Strength. Range -50 to -125 dBm
Value
1
= 127 (Set during initialization)
Max_RSSI *
SINT
Maximum Signal Strength. Range -50 to -125 dBm
Value
1
= -128 (Set during initialization)
Cell_Net_State
SINT
Status of the connection to the cellular network.
0: Disconnect
1: Connecting
2: Connected
Value
1
= 0 (Not connected)
MAC
SINT[6]
ICX35-HWC MAC ID. Value
1
= Not available
WAN_IP
DINT
Cellular network IP. Value
1
= 0.0.0.0
Cell_Net_Disconnects *
DINT
Number of times ICX35-HWC is disconnected from the
cellular network since power on
LAN_KBytes_Sent *
DINT
Number Kbytes sent on LAN since power on
LAN_KBytes_Received *
DINT
Number of Kbytes received LAN since power on
WAN_KBytes_Sent *
DINT
Number of bytes sent WAN since power on
WAN_KBytes_Received *
DINT
Number of bytes received WAN since power on
SMS_MSGs_Sent *
DINT
Number of SMS messages sent since power on
SMS_MSGs_Received *
DINT
Number of SMS messages received since power on
SMS_MSGs_Rx_Free_Buffer_Coun
ter *
DINT
Number of free slots in the Rx SMS buffer. Max 500
message storage.
PowerOnTime_Year
INT
Power on time year
PowerOnTime_Month
INT
Power on time month
PowerOnTime_Day
INT
Power on time day
PowerOnTime_Hour
INT
Power on time hour
PowerOnTime_Minute
INT
Power on time minute
PowerOnTime_Second
INT
Power on time seconds
Link_Time_Days
DINT
Link Time: Days of cellular connection. Value
1
= 0
Link_Time_Hours
DINT
Link Time: Hours of cellular connection. Value
1
= 0
Link_Time_Minutes
INT
Link Time: Minutes of cellular connection. Value
1
= 0
Link_Time_Seconds
INT
Link Time: Seconds of cellular connection. Value
1
= 0
Data_Usage_Current_Month
DINT
Data usage of current month in KB
Data_Usage_Previous_Month
DINT
Data usage of last month in KB
Data_Usage_Current_Day
DINT
Data usage for today in KB
Data_Usage_Previous_Day
DINT
Data usage of previous day in KB
FW_Version
SINT[24]
ICX35-HWC firmware version
Phone_Number
SINT[18]
ICX35-HWC cellular phone number
IMEI
SINT[20]
ICX35-HWC IMEI number
* These parameters can be reset to 0.
1
These tags provide a placeholder value when the ICX35-HWC WAN/LAN is
disconnected or in a Connecting state.
Tip: To check if a new SMS text message is received, monitor the
ICX35.STATUS.SMS_MSGs_Received controller tag. This tag increments by 1 for every SMS text
message received. You must toggle the ICX35.CONTROL.Get_Status controller tag for updates.
