ICX35-HWC ♦ Industrial Cellular Gateway
Start Here
3G/4G LTE
User Manual
ProSoft Technology, Inc.
Page 9 of 127
1.3
Jumpers
The three jumpers on the back of the unit are described from top to bottom:
Jumper Position
Description
(Not visible) Factory Use Only
Temporarily sets the LAN IP address to 192.168.0.250.
The jumper should be kept on until the unit boots and becomes accessible. It
remains at this address as long as the jumper is in place, regardless of the
LAN IP address configured on the web server.
The ICX35-HWC reverts to the configured server address once the jumper is
removed.
Resets the ICX35-HWC to factory defaults.
The jumper should be kept until all the LEDs start to slowly blink. At this point,
the jumper should be removed and the unit should be power cycled. After
doing so, the front panel LEDs blink continuously, but the unit will not operate
any further. Remove this jumper and power cycle the device to restore normal
operations with factory defaults.
The custom username/password will also be reset to the defaults values.
1.4
Reset (Power Cycle) Button
The reset button is located at the bottom of the front panel of the ICX35-HWC.
