PRONAR T314, Manual

Page: 29 / 114

SECTION 2 Pronar T314, Pronar T315, Pronar T316
2.7
•
After completing work associated with lubrication, remove excess oil or grease.
The machine should be kept clean and tidy.
•
The user must not repair by himself the hydraulic and pneumatic cylinders. In the
event of damage to these elements, repair should be entrusted to authorised
service point or replace elements with new parts.
•
Do NOT make repairs to drawbar (straightening, repairing or welding). A
damaged drawbar must be replaced.
•
Do NOT install additional appliances or fittings not according to the specifications
defined by the Manufacturer.
•
The slurry tanker may only be towed when axles and brake system are reliable.
•
Regularly check technical condition and mounting of all guards and protective
elements.
•
Should it be necessary to change individual parts, use only original parts or those
indicated by the Manufacturer. Non-adherence to these requirements may put the
user and other people's health and life at risk, and also damage the machine.
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may find its way under the skin and cause infections. In
the event of contact of oil with eye, rinse with large quantity of water and in the
event of the occurrence of irritation consult a doctor. In the event of contact of oil
with skin wash the area of contact with water and soap. Do NOT apply organic
solvents (petrol, kerosene).
•
The machine can only be stood on when it is absolutely motionless and the
tractor engine is switched off.
•
The slurry tanker should be kept clean and tidy.
2.1.6 SAFE DRIVING
•
When driving on public roads, comply with the road traffic regulations.
•
During transport adjust travel speed to the prevailing road conditions. If possible
avoid travelling on uneven terrain and unexpected corners.