PRONAR T314, Manual

Page: 34 / 114

Pronar T314, Pronar T315, Pronar T316 SECTION 2
2.12
•
During shaft operation telescopic pipes must overlap by at least one third of their
length.
•
When using the slurry tanker and PTO shaft, do not use PTO rotation speed
greater than 540 rpm. Do NOT overload shaft and machine and also engage the
clutch suddenly. Before starting PTO shaft make certain that the PTO rotation
direction is correct.
•
The chains preventing the shaft cover from turning while the shaft is working,
shall be secured to a fixed element of machine structure.
•
Do NOT go over and under the shaft or stand on it equally during work as also
when the machine is parked.
•
The PTO shaft has markings on the casing, indicating, which end of the shaft
shall be connected to the tractor.
•
Never use a damaged PTO shaft, it may cause an accident. A damaged shaft
must be repaired or replaced.
•
Disconnect the drive shaft each time when it is not necessary to drive the
machine, or when the tractor and slurry tanker are at an unsuitable angle to each
other.
2.1.9 DESCRIPTION OF MINIMAL RISK
Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain minimal risk, which could lead to an accident, and this is connected mainly
with the actions described below:
•
using the machine for purposes other than those for which it is intended,
•
being between the tractor and the machine while the engine is running and when
the machine is being hitched,
•
operating the slurry tanker with the safety guards removed or faulty,
•
not maintaining safe distance while the slurry tanker is in operation,
•
operation of the slurry tanker by persons under the influence of alcohol
•
cleaning, maintenance and technical checks,