PRONAR T314, Manual

Page: 26 / 114

Pronar T314, Pronar T315, Pronar T316 SECTION 2
2.4
•
When connecting the hydraulic conduits to the tractor, make sure that the
hydraulic systems of the tractor and slurry tanker are not under pressure. If
necessary reduce residual pressure in the system.
•
Before hitching slurry tanker to tractor check that both machines are in good
technical condition.
•
The machine unhitched from tractor must be immobilised with parking brake. If
the machine is positioned on a slope, it should be additionally secured against
moving by placing chocks under the machine's wheels. Terminals of hydraulic,
electrical and pneumatic conduits should be protected against contamination.
2.1.3 HYDRAULIC AND PNEUMATIC SYSTEM
•
When operating, the hydraulic and pneumatic systems are under high pressure.
•
Regularly check the technical condition of the connections and the hydraulic
conduits. There must not be any leaks of hydraulic oil.
•
Before proceeding to maintenance-repair work, make certain that the hydraulic
system is not under pressure.
•
Rubber hydraulic conduits must be replaced every 4 years regardless of their
technical condition.
•
Use the hydraulic oil recommended by the Manufacturer.
•
After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil, which has lost its properties, should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
•
Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
2.1.4 LOADING AND UNLOADING
•
Gases, which may be flammable and harmful to health, are produced during
fermentation of liquid manure or sediments in the tank.
•
Do not approach the tank with an open flame, do NOT smoke cigarettes etc. near
the tank. Danger of gas explosion.