PRONAR T314, Manual

Page: 65 / 114

SECTION 4 Pronar T314, Pronar T315, Pronar T316
4.13
¨
Start driving in the field, open the tank damper.
¨
Reduce drive shaft speed, control PTO speed in order to maintain constant
pressure in the tank.
Ö
When pressure of 0.5 bar is exceeded, safety valve (2) – figure (4.3),
located on the rotary vane vacuum pump will be opened.
¨
After emptying the tank, disengage PTO drive and close the damper after
levelling the pressure.
DANGER
Keep a safe distance from liquid spreading spout when spreading the liquid.
ATTENTION!
Unauthorised repairs and changes to settings of the safety valve are forbidden
and regarded as use of the machine contrary to its intended purpose. Repairs
and adjustments of the safety valve should be entrusted to specialist
workshops.
Failure of safety valve or unauthorised and incorrect adjustment of safety valve's settings
may cause excessive increase of pressure in the tank, as a result of which the tank or
elements of the slurry tanker's equipment may get damaged. In such a situation, immediately
stop PTO drive and continue unloading. When pressure of about 0.2 bar is reached, restart
the drive in order to reach the maximum overpressure. Repeat the process until the tank is
completely empty. Inefficient safety valve should be repaired or adjusted.
4.5 TRANSPORTING THE MACHINE
When driving slurry tanker on public or private roads, respect the road traffic regulations,
exercise caution and prudence. Listed below are the key guidelines for driving the tractor and
machine combination.
•
Before moving off make sure that there are no bystanders, especially children,
near the slurry tanker or the tractor. Take care that the driver has sufficient
visibility.