PRONAR T314, Manual

Page: 54 / 114

Pronar T314, Pronar T315, Pronar T316 SECTION 4
4.2
4.1 PREPARING SLURRY TANKER FOR WORK
4.1.1 PRELIMINARY INFORMATION
The slurry tanker is supplied to the user completely assembled and does not require
additional assembling of machine sub-assemblies. The manufacturer guarantees that the
machine is fully operational and has been checked according to quality control procedures
and is ready for use. This does not release the user from an obligation to check the
machine's condition prior to purchasing and before first use.
4.1.2 HAND-OVER AND INSPECTION OF THE MACHINE AFTER
DELIVERY
After delivery of the machine to the buyer, the user is obliged to check technical condition of
the slurry tanker (one-time inspection). While buying the machine, the user must be informed
by the seller about the method of use of the machine, risks resulting from the use for
purposes other than intended, the method of the machine hitching and the principles of the
machine construction and design. Detailed information concerning the machine hand-over
are included in the WARRANTY BOOK .
Checking the slurry tanker after delivery
•
Check completeness of the machine according to order.
•
Check technical condition of safety guards.
•
Check condition of paint coating; check the machine for traces of corrosion.
•
Check the machine for damage resulting from wrong transport of the machine to
its destination (crushing, piercing, bending or breaking of minor elements etc.).
•
Check air pressure in tyres and check correct tightening of wheel nuts.
•
Check technical condition of drawbar eye and if correctly installed.
•
Check oil level in the rotary vane vacuum pump.
If non-conformities are found, do not attach and start the slurry tanker. Discovered defects
should be notified directly to the seller in order to remove them.