PRONAR T314, Manual

Page: 57 / 114

SECTION 4 Pronar T314, Pronar T315, Pronar T316
4.5
•
incorrect operation of brake cylinders,
•
other suspected faults,
stop operating the slurry tanker and do not operate it until the malfunction is corrected. If a
fault cannot be rectified or the repair could void the warranty, please contact retailer for
additional clarifications or to perform the repair.
When generating negative pressure or overpressure in the tank, check the
manovacuometer's indications regularly. Pressure should change smoothly and should be
maintained at the same level for a longer period of time after stopping the vacuum pump.
Check tightness of the tank if there are sudden pressure jumps or if pressure changes too
quickly – chapter 5. If a leak is caused by the tank damage (e.g. during transport), notify the
sale point in order to perform repair.
4.1.4 PREPARING THE SLURRY TANKER FOR NORMAL USE
Scope of inspection activities
•
Visually inspect if the tyres are properly inflated. In case of doubt, carefully check
tyre pressure.
•
Check technical condition of drawbar eye.
•
Check correctness of electrical system operation.
•
Check technical condition and completeness of safety guards.
•
Install slow-moving vehicle warning triangle plate - whenever the slurry tanker
moves on public roads.
•
Check lubricating oil level in the transmission of the rotary vane vacuum pump
and level of oil lubricating the pump vanes.
DANGER
Careless and improper use and operation of the slurry tanker, and non-
compliance with the recommendations given in this operator's manual is
dangerous to your health.