PRONAR T314, Manual

Page: 46 / 114

Pronar T314, Pronar T315, Pronar T316 SECTION 3
3.6
In the rear part of the tank there is gate (1) – figure (3.3) to which damper (4) is bolted. The
damper is controlled by means of the tractor's external hydraulic system. Connector pipe (9)
is attached to the damper's outlet opening. Depending on requirements, spout (5) with spoon
(6) or suction hose (8) is attached to the connector pipe.
TIP
The slurry tanker can be equipped with accessories for emptying and filling the
tank with clean water. For detailed information, please refer to Annex B and the
pump manual enclosed with this publication.
3.2.3 MAIN BRAKE
The slurry tanker is equipped with double conduit pneumatic brake system - figure (3.4), or
single conduit pneumatic brake system – figure (3.5) – optional equipment. The machine
brakes are activated from the tractor driver's cab by pressing on the brake pedal.
The function of the control valve (1), Figure (3.6), is to activate the slurry tanker's brakes
simultaneously when tractor's brakes are applied Furthermore, in case of an inadvertent
disconnection of the line between the slurry tanker and the tractor, the control valve will
automatically activate slurry tanker's brakes. Valve used in the system is equipped with a
circuit causing the brakes to be applied when machine is disconnected from the tractor.
When compressed air line is connected to the tractor, the device automatically applying the
brakes now changes its position to allow normal brake operation.