PRONAR PRONAR N262, Operator'S Manual

Page: 94 / 145

Pronar N262 N262/1 SECTION 4
4.22
•
Inspect tightness of nuts after first use of the manure spreader, after first travel under
load and then every 6 months of use or every 25,000 km. In the event of intensive
work, check the nut tightening at least every 10,000 km. The inspection should be
repeated individually if a wheel has been removed from the wheel axle.
•
Regularly check and maintain correct pressure in tyres according to Operator's Manual
(especially if manure spreader is not used for a longer period).
•
Pressure and tyres should be also checked during the whole day of intensive work.
Please note that higher temperatures could raise tyre pressure by as much as 1 bar.
At high temperatures and pressure, reduce load or speed.
•
Do not release air from warm tyres to adjust the pressure or the tyres will be
underinflated when temperatures return to normal.
•
Tyre valves should be protected with the appropriate caps to avoid soiling.
•
Do not exceed the manure spreader's maximum design speed.
•
When machine is operated all day, check temperature of tyres.
•
Adhere to 30 minutes rest for cooling tyres after driving 75 km or after 150 minutes
continuous travel depending on which occurs first.
•
Avoid potholes, sudden manoeuvres or high speeds when turning.