PRONAR PRONAR N262, Operator'S Manual

Page: 22 / 145

Pronar N262 N262/1 SECTION 1
1.12
securing plan precisely. A correctly secured manure spreader does not change its position
with regard to the transport in vehicle. The securing elements must be selected according to
the guidelines of the Manufacturer of these elements. In case of doubt apply a greater
number of securing straps in order to immobilise the machine. If necessary, sharp edges of
the manure spreader should be protected at the same time protecting the securing straps
from breaking during transport.
IMPORTANT
When being road transported on a motor vehicle the manure spreader must be mounted
on the vehicle's platform in accordance with the transport safety requirements and the
regulations.
Driver of the vehicle should be particularly careful during travel. This is due to the
vehicle's centre of gravity shifting upwards when loaded with the machine.
Use only certified and technically reliable securing measures. Carefully read the
manufacturer's instructions for the securing measures.
During reloading work, particular care should be taken not to damage parts of the machine's
fittings or the lacquer coating. The tare weight of the manure spreader in condition ready for
travel is given in table (3.1).
DANGER
Incorrect application of securing measures may cause an accident.
1.5.2 INDEPENDENT TRANSPORT BY THE USER
In the event of independent transport by the user after purchase of the manure spreader, the
user must read the manure spreader Operator's Manual and adhere to the recommendations
contained therein. Independent transport involves towing the manure spreader with own
agricultural tractor to destination. During transport adjust travel speed to the prevailing road
conditions, but do not exceed the maximum design speed.
IMPORTANT
Before transporting independently, the tractor driver must carefully read this operator's
manual and observe its recommendations.