PRONAR PRONAR N262, Operator'S Manual

Page: 120 / 145

Pronar N262 N262/1 SECTION 5
5.26
5.6 MANURE SPREADER LUBRICATION
Manure spreader lubrication must be carried out in places indicated in figures (5.11) & (5.12),
and also detailed in table (5.6). The manure spreader is equipped with grease nipples
facilitating maintenance and marked with yellow labels (item 14 – table (2.1)).
TAB. 5.5 Recommended lubricants
LISTED ON
TAB. (5.6)
DESCRIPTION
A machine general-purpose grease (lithium, alkaline),
B
permanent grease for heavily loaded elements with addition of MOS
2
or
graphite
C anticorrosion preparation in aerosol
D ordinary machine oil, silicon grease in aerosol
Manure spreader lubrication should be performed with the aid of a manually or foot operated
grease gun, filled recommended grease. Before commencing work insofar as is possible
remove old grease and other contamination. Remove and wipe off excess oil or grease.
TAB. 5.6 Lubrication schedule
ITEM LUBRICATION POINT
NUMBER OF
LUBRICATION
POINTS
T
Y
P
E
O
F
G
R
E
A
S
E
F
R
E
Q
U
E
N
C
Y
1
Hub bearings 4 A 24M
2 Drawbar eye 1 B 14D
3 Leaf spring absorber pin 4 A 3M
4
Rocker arm pin 2 B 3M
5
Leaf spring absorber sliding surface 4 A 3M