PRONAR PRONAR N262, Operator'S Manual

Page: 128 / 145

Pronar N262 N262/1 SECTION 5
5.34
In winter, freezing water may cause damage to paint coating or
machine elements.
ATTENTION
Remove the remains of manure from the manure spreader each time after finished work.
During work use the proper, close-fitting protective clothing, gloves and appropriate
tools.
Take care not to lower or rise the tailgate when it is locked using a cut-off valve.
Otherwise, hydraulic cylinders and/or tailgate may be damaged.
5.9 PREPARATION FOR END OF SEASON
After finishing fieldwork the manure spreader must be properly prepared for winter storage.
In order to do this:
•
thoroughly remove the remaining manure and wash off in accordance with
Chapter 5.8,
•
check technical condition of: bearings, shields, chains, electrical system,
pneumatic system and indicators,
•
grease all inspection points of the manure spreader,
•
check air pressure in tyres,
•
corroded or damaged surface should be cleaned and properly protected with a
thin layer of grease, anticorrosion preparation or priming paint,
•
secure PTO shaft, check condition of its shields, grease moving elements of PTO
shaft,
•
check visually the components which wear most frequently and replace them if
necessary,
•
tyres should be preserved at least once a year using generally available
substances for this purpose.