PRONAR PRONAR N262, Operator'S Manual

Page: 87 / 145

SECTION 4 Pronar N262 N262/1
4.15
•
The chain conveyor speed is increased by turning the knob
counterclockwise, maximally to "10" setting.
TIP
When the manure spreader travel speed is high and the conveyor speed is low, a small
spreading dose is obtained.
When the manure spreader travel speed is low and the conveyor speed is high, a large
spreading dose is obtained.
Various characteristics of manure (e.g. dampness, specific weight, granulation), influence
of wind determine the spreading parameters. That is why it is impossible to predetermine
the settings of the manure spreader's adjusting devices. In order to determine the
settings, preset the machine, make a test and correct the settings, if necessary.
FIG. 4.3 Adjustment of chain conveyor speed (controlled from the manure
spreader)
(1) conduit bracket, (2) flow regulator knob, (3) manifold lever
If the manure spreader is equipped with the hydraulic system controlled by the manifold
installed on the outrigger (1), set the chain conveyor speed using flow regulator knob (2)
located on the manifold. The conveyor movement is activated and the conveyor movement
direction is changed using manifold lever (3) - figure (4.3).