PRONAR PRONAR N262, Operator'S Manual

Page: 75 / 145

SECTION 4 Pronar N262 N262/1
4.3
visually inspect the manure spreader individual components for mechanical
damage resulting from incorrect loading, transport or unloading of the
machine,
check technical condition of the spreader lights and indicators,
check technical condition of PTO shafts and their shields as well as
completeness of these elements,
check technical condition of hydraulic and pneumatic lines,
check that there are no hydraulic oil leaks.
4.1.2 PREPARING THE MANURE SPREADER FOR THE FIRST HITCH
In preparation for the hitching of the spreader for the first time, check the type of the tractor
system and possibly configure the spreader brake system. If the tractor is equipped with a
single conduit brake system, the spreader's system (double conduit) must be configured for
the tractor. In order to do this:
remove the yellow spiral conduit (1) together with the connector,
dismantle conduit (4), which connects filter (7) with control valve (3),
on the control valve side, unscrew the conduit together with connector
(5) and seal set (6),
in place of the removed conduit plug the valve with the cap (8) and washers
(10) that are supplied with the trailer,
dismantle red connector that is screwed to the red spiral conduit and replace
the red connector with black connector (9). Install washer (10).