PRONAR PRONAR N262, Operator'S Manual

Page: 116 / 145

Pronar N262 N262/1 SECTION 5
5.22
If the manure spreader is unhitched from the tractor, contact should be protected by cover or
placed in its designated socket. Before the winter period it is recommended to preserve the
seal with special preparations (e.g. silicon grease for rubber elements).
Each time before connection of the machine inspect technical condition and cleanness of
contacts and sockets in tractor. If necessary clean or repair tractor socket.
Checking the manure spreader connections:
•
each time before hitching manure spreader to tractor.
5.3.7 REPLACEMENT OF THE PNEUMATIC LINE
Pneumatic lines should be replaced when permanently deformed, cut or frayed.
FIG. 5.10 Installation of the pneumatic line
(1) pneumatic line, (2) connecting nut (3) clamping ring, (4) reinforcing sleeve
Required service actions
Release all pressure from the system.