PRONAR PRONAR N262, Operator'S Manual

Page: 113 / 145

SECTION 5 Pronar N262 N262/1
5.19
DANGER
Before proceeding to dismantle filter, reduce pressure in supply line. While disengaging
filter slide gate, hold cover with other hand. Stand away from filter cover vertical direction.
Depending on manure spreader working conditions, but not less than once in three months,
take out and clean air filter inserts, which are located in pneumatic system connection lines.
Inserts are used many times and are not subject to changing unless they are mechanically
damaged.
Required service actions
Reduce pressure in supply line.
Reduction of pressuring line may be achieved by pressing the head of
the pneumatic connection to resistance point.
Remove securing slide (1) – figure (5.8).
Hold the filter cover (2) with the other hand. After removing slide lock,
the cover is pushed off by the spring, in the filter housing.
The insert and the filter body should be carefully washed out and blown
through with compressed air. Assembly should be done in reverse order.
Cleaning the air filter (filters):
•
every 3 months of use,