PRONAR PRONAR N262, Operator'S Manual

Page: 82 / 145

Pronar N262 N262/1 SECTION 4
4.10
outrigger in such a manner as to enable controlling the manure spreader
operation from the tractor cab through the opened rear window.
Open cut off valve (3) – figure (3.4) located on the manure spreader frame and
set the drawbar eye height, using the parking stand, so that it is possible to
connect the machines.
Reverse tractor, hitch manure spreader, check coupling lock protecting
machine against accidental unhitching.
If the agricultural tractor is equipped with an automatic coupler, ensure
that the hitching operation is completed and that drawbar eye is
secured.
Raise the parking stand to a required height.
After coupling the machines, the parking stand must be raised so as to
not hit the ground or any other obstacle.
Secure the parking stand against lowering using a valve.
Turn off tractor engine. Ensure that unauthorised persons do not have access
to the tractor cab.
Connect pneumatic system conduits (applies to double conduit systems):
Connect pneumatic conduit marked yellow with yellow socket in
tractor.
Connect pneumatic conduit marked red with red socket in tractor.
Connect pneumatic system conduit (applies to single conduit system).
Connect pneumatic conduit marked black with black socket in tractor.
Connect hydraulic brake system (applies to spreader version with hydraulic
brake).
Hydraulic brake system conduit is marked with information decal (24)
– table (2.1).
Connect hydraulic conduits of the floor conveyor movement system to the
tractor (refers to the system controlled from the tractor).