![background image](http://html.mh-extra.com/html/promise-technology/vtrak-s3000/vtrak-s3000_quick-start-manual_1617268043.webp)
Task 10: Setting-up the Subsystem
43
2.
To verify the maintenance mode settings, type
net -m
and press Enter.
administrator@cli>
net -m
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
CtrlId: 1
Port: 1
Type: Management Ethernet
IPType: IPv4
IP: 192.168.10.101
IPMask: 255.255.255.0
MAC: 00:01:55:AE:02:AE
DNS: 0.0.0.0
Gateway: 192.168.10.1
DHCP: Disabled
This completes the Management port setup. Go to “Task 11: Configuring Storage
on the Subsystem” on page 46.
To see the full set of CLI commands, at the admin@cli> prompt, type
help
and
press Enter.
Setting up VTrak with the CLU
1.
At the administrator@cli> prompt, type
menu
and press Enter.
The CLU main menu appears.
Figure 15.CLU main menu
2.
With
Quick Setup
highlighted, press Enter.
The first Quick Setup screen enables you to make Date and Time settings.