VTrak S3000 Quick Start Guide
18
2.
If you entered a domain name and you want to append the suffix to the DNS
server, check the
Append suffix to DNS lookup
box.
Adding a DNS Server
If your network has Domain Name Server (DNS) and you want VTrak to work with
it, enter the DNS IP address here. You can have up to two DNS servers.
To add a new DNS:
1.
Highlight one of the DNS servers and click the
Delete
button.
Click the
Yes
button to confirm.
2.
Click the
Add
button and enter the IP address for a DNS server.
3.
In the DNS (up to two) dialog box, enter the IP address of your DNS server
and click the
OK
button.
You return to the
Network Configuration
dialog box where the new DNS
appears in the list.
Specifying a Gateway
If your network has a gateway and you want VTrak to work with it, enter the
Gateway IP address in the Default gateway field.
Changing NIC Settings
An FC appliance (server) has four network ports,
eth0
through
eth3
. An iSCSI
appliance has up to eight network ports,
eth0
through
eth7
. On all appliances,
eth0
is the management port. The default IP addresses are:
Obtain network setting information from your Network Administrator.
eth0 – 192.168.253.10
eth4 – 10.0.0.6
eth1 – 10.0.0.3
eth5 – 10.0.0.7
eth2 – 10.0.0.4
eth6 – 10.0.0.8
eth3 – 10.0.0.5
eth7 – 10.0.0.9
Caution
Network port
eth0
is the management port.
In step 3 below, do NOT click the
Delete
button for network port
eth0
.
Important
An IP address conflict among network ports
eth1
through
eth3
prevents a High Availability configuration, even when those ports
are not connected.
