background image

Task 12: Setting-up Basic Storage

57

Click the 

Next

 button to continue.

Either the 

Set Client Fibre Channel Properties

 or the 

Set Client iSCSI 

Properties

 dialog box opens.

3.

In the dialog box, click 

Add 

button. 

The 

Add Initiator WWPN

 dialog box opens.

4.

In the dialog box, enter your initiator WWPN and click the 

OK

 button to 

continue.
The 

Set Client Properties

 dialog box opens with the initiator WWPN in the 

list.

5.

The next step depends on your choice of action.

To add another WWPN, click the 

Add

 button.

To choose the WWPNs you want to use, check the box beside each 
one.

To continue, click the 

Next 

button. 

The 

Enter the Generic Client Name

 dialog box opens.

6.

In the dialog box, 

Enter a client name into the field provided.

Choose the 

Client Type

 from the dropdown menu.

Check 

Is Clustered 

box if you plan to assign the same storage to 

multiple clients.

If the Client PC is running, click the 

Find

 button to discover it. If the PC 

is found, its IP address is input automatically.

If the Client PC is offline, enter the IP address manually. 

Click the 

Next

 button to continue.

The 

Fibre Channel Options

 dialog box opens.

7.

In the dialog box, click the 

Next

 button to continue.

VTrak does not support VSA.
The 

Select Persistent Reservation Option

 dialog box opens.

8.

In the dialog box, uncheck the box to disable the 

Persistent Reservation

 

feature, and click the 

Next

 button.

Persistent Reservation applies to clustering applications.
The 

Add the Client

 dialog box appears.

9.

In the dialog box, verify the information and click the 

Finish

 button.

The new client 

 appears in the Tree under SAN Clients 

.

Summary of Contents for VTrak S3000





































































Reviews: