![background image](http://html.mh-extra.com/html/promise-technology/vtrak-s3000/vtrak-s3000_quick-start-manual_1617268020.webp)
VTrak S3000 Quick Start Guide
20
Step 3: Hostname
When you click the
Next
button in the
Configure VTrak
dialog box, the
Warning
dialog box appears. At this phase of the system setup, you have no storage
configured. Therefore, the warning does not apply.
1.
In the dialog box, click the
OK
button to continue.
The
Set Hostname
dialog box appears.
2.
In the dialog box, do one of the following actions:
•
Click the
Cancel
button to accept the Present (default) hostname.
•
Enter a new hostname for the VTrak appliance and click the
OK
button.
When you click the
OK
button, the network server automatically restarts.
That action drops your connection. Wait two to three minutes, then try to log
in. If you cannot log in, wait another minute and try again.
To see the new hostname as the Present hostname in the
Set Hostname
dialog box, you must reboot the appliance.
When you log in, the
Configure VTrak
dialog box appears, ready for Step 4.
Caution
If you plan to change the hostname, do so before you connect to
your storage devices.
If your storage is set up already and you change the hostname,
you must reconfigure your storage to recognize the new
hostname.